User Tools

Site Tools


wiki:status_led

Status LED

On the EspLight, there is a status LED. Each blinking speed has another explanation. This table is only valid when using the original EspLight firmware:

Blink delayexplanationfix
LED is off You have not powered the EspLight. Power the EspLight. See connect_leds_and_power.
LED is on There is no firmware installed. Flash firmware into the EspLight. See firmware_upload.
0.1 seconds The EspLight is trying to connect with a wireless network. Wait for a few seconds.
1 second The EspLight is connected to wireless network. It works.
3 seconds The EspLight is in accesspoint mode. See network_setup When you don´t want this, press the Reset button to restart the EspLight.
wiki/status_led.txt · Last modified: 2015/12/13 16:05 by fridgefire